BA/BF Upgrades

FPT Stage 1 $1250

• Pre tune inspection & dyno run
• FPT Custom tune
• Post tune dyno run and print out

FPT Stage 1 Plus Package $1900

• FPT Stage 1 Basic
• Bosch 1000cc Injectors

FPT Stage 2 Package $5950

• Stage 1 & 1 Plus
• Process West stage 2 Kit
• 4" Dump pipe & S/S Cat
• Actuator
• Fuel Module/Pump Upgrade (E85 Safe) $500 (Sedan only, ute extra $250)

Optional Upgrades To Above Packages

• Valve spring upgrade with Crow Cams Springs - $880
• Upgrade to ARP2000 headstuds (If done at the same time as valve springs) - $850
• Ported turbo housing, larger flapper including labour to remove and refit turbo - $850
• E85 Tune (Includes licensing for the COS with PCMTEC) - $1200

FPT Stage 3 Package $8950

• Pre tune inspection & dyno run
• FPT Custom Tune (Single Fuel & Boost)
• 1000cc Injectors
• Fuel Module/Pump Upgrade (E85 Safe) (Sedan only, ute extra $250.)
• Process West Stage 2.2 Kit
• Crow Valve spring upgrade
• 4in S/S Dump & S/S Cat (Bolts to Factory Catback System)
• Airbox & Battery Relocation
• Wastegate flapper mod, Actuator Upgrade

Tuning & Misc items

PCMTEC

• Single Fuel/Boost - $1250 add $150-$200 if you have cams.
• Single Fuel/Multiple Boost (COS) - $1700
• ZF gearbox tune $350
• 98/E85 (COS) - $2300
• MAP-130 4 bar Pressure Sensor upgrade - $150

• Process 2.2 Kit fitted - $2650 (Minus air intake)
• Antz Airbox & Battery relocation - $850
• 1000cc Injector upgrade - $700
• Advanced Headers 4in Dump pipe & Cat - $1100
• Billet Oil pump Upgrade - $1650
• Timing Gear - $1250 if done as a one off job, $800 if a parts only while doing an oil pump
• Headstuds & Valve Spring Upgrade - $1750 (ARP2000 & Crow 1809)
• Upgrade to full 4in s/s full exhaust Sedan only - $2400

• FPT 1000hp Kit Plaz surge tank, twin Pierburg pump, twin wiring harness, Plaz Rail, FPR2000, Braided lines & labour - $3500
• Pulsar GTX3582 Turbo upgrade (with actuator, profiled wastegate port, braided oil line kit & fitting) - $2050 (If External Gate is optioned up) - $2550
• Garrett GTX3582 Turbo upgrade (with actuator, wastegate flapper valve mod, .7 cover actuator bracket braided oil line kit & fitting) - $3700 (If External Gate is optioned up) - $4100
• External Gate Kits - $1350 Fitted

• NPC Twin plate clutch installed (500kw rated) -$3300
• IMS Diff Hat Upgrade with Front Bushes - $2250
• Add a Turtrac – extra $2200
• Wavetracs add - $650
• Diff Bush Upgrade - $1000
• 450kw Tailshaft - $1195
• Pro series 2 piece upgrade - $2295
• Single piece alloy - $2295 (Slip joint style)
• Single piece to suit ZF - $2895
• All shafts add $70 freight

Ford Falcon XR8

XR8 Stage 1 $1250

• Pre tune inspection and dyno run
• FPT Custom Tune
• Post tune dyno run & print out